Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Minutes===== * Finished Schematic and circuit board design\\ * Had major issues finding the correct circuit components for the 3d representation\\ * Solved these issues by measuring some components we already have and matching them in KiCad\\ * Also made a mistake within the schematic where the pins did not match up with the FDTI\\ * Solved this issue by manually editing a 1x06 pin in the KiCad footprint editor\\ * Started talking about shadowing in the following weeks\\ Members present: Blake: 3 Hours and Elisha: 3 Hours week9_-_november_08_2024.txt Last modified: 2024/11/15 19:03by blake24