Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. * worked on Bare Bones Arduino \\ * difficulty: breadboard 2nd LED not working, solution: increased the voltage by putting an extra wire \\ * Difficulty: Sending 5V through Voltage Regulator results in ~3V, Solution: Send the VCC directly through to the 5V Bus \\* Diffuctly: Only blinked once, Solution: Paolo's computer is weird, Blake's Computer made it turn on and blink periodically \\*Worked on KiCAD Documentation: EAGLE imports into KiCAD future tasks Attended: Paolo, Tiffany week_6_-_2.txt Last modified: 2024/10/19 03:46by probles9