Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ===== 2/24/2025 ====== * Worked on Bare Arduino circuit * Complications: Wires breaking, LEDs not working, missteps on circuit building (wrong connections); was able to upload to Arduino IDE, but the LED would not blink. * Next time: try to fix the blinking problem by tweaking wires and components, or replacing LEDs on breadboard (use multimeter to see if attiny is working). ===== 2/26/2025 ====== * Attempted to fix bare arduino circuit by replacing microcontroller twice * Used BME 280 sensor to see if it was flowing through. week_6_-_february_24_2025.txt Last modified: 2025/02/27 00:05by dfang