Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ===== 03/10/2025 ===== * Completed mid semester report. * Completed layout of PCB in KiCAD - still need to apply final steps (silkscreen, optimization, etc) ===== 03/12/2025 ===== * Worked on PCB editor and copper filled all wires. * Opacity of zones were set to 100%, so couldn't see fillings on both front and back of pcb; set opacity lower to see both sides. * Completed layout week_8_-_march_10_2025.txt Last modified: 2025/03/13 00:02by dfang