====== Team Apple Meeting Minutes for Week of October 28, 2019 ======

==== Updates====
  * Update Keoni and Noah about Apple v4.1.1 and Apple v4.1.0
  * Archiving Wiki Apple Spring 2019
  * We were able to send data packets to the firmware database 
  * Trying to fix voltage problems
  * Update Eagle schematic and PCB to have the RX connected to pin 2 and TX connected to pin 9 on the Pro Mini.   
  * Continue making more PCB boards and taking apart the old ones to reuse their female/male headers
  * Update Wiki
 
Convert Eagle Files to Gerber Files: Make sure to be in "Board Eagle Window" 
  * change with the dimension readings from "inch" to "mm" since SEEED Studio only takes 
  * them in "mm", right click on the dimension arrows where it'll eventually light up and pop-up options 
  * -> Properties -> click on "Unit" to change from inch to mm then follow below 
  * -> File -> CAM Processor... -> CAM Processor window will pop-up takes 3 seconds 
  * -> check box "Export as ZIP", you may check over the individual layers on the left side under "Gerber"
  * -> Finally click "Process Job" -> save the ZIP file in your desired directory -> OK -> "Discard"

To save pictures of the Eagle Schematic and Board: 
  * -> File -> Export -> Image -> Browse (for desired directory to be saved in) -> OK

SEEED Studio Options
  * -> Google "seeed studio pcb" -> click on "Fusion PCB/PCBA - Seeed Studio" -> Add Gerber Files 
  * -> Mostly everything stays the same except the dimensions *Units in mm, desired PCB color, 
  * and maybe the number of layers if more than the usual 2 layers (or less)
  

==== Reminders ====
  * Critical Design Review (CDR) on Saturday, 11/16 
  * RonHo order (Voltage Regulators) scheduled delivery on the end of October (delayed)
  * Mid Semester Progress Report due Thursday, 10/31

[[weatherbox:apple:start|Back to Apple Homepage]]