====Minutes September 24, 2018====
People attended: Jason, Alex

  * Replace present voltage regulators (2) that were outputting 0.1mV 

====Minutes September 25, 2018====
People attended: Jason, Alex

  * Replace header that was melted off due to Reflow station(PCB Heater)

====Minutes September 26, 2018====
People attended: Jason, Alex

  * Problem: When removing the header, the pins of the header got stuck in the PCB.
  * Kenneth helped to remove the pins. 

====Minutes September 28, 2018====
People attended: Jason, Alex

  * Worked on Powerpoint for PDR.