===== Week 10 =====

==== Meeting Minutes October 30, 2018 ====
**Attended: Mizpah, Sharmaine, Xiao**

=== Updates === 
  * Worked on Mid Semester Progress Report 

===To Do===
  * Finish Mid Semester Progress Report DUE 10/31/18 by noon

==== Meeting Minutes October 31, 2018 ====
**Attended: Mizpah, Sharmaine, Xiao**

=== Updates === 
  * Will be working with cranberry's board for deployment
  * Changed the destination address of cranberry's Xbee to relay's serial high and low
  * Connected a 5V step-down/step-up voltage regulator
        - Bare Arduino will be connected to solar panel and battery so the voltage going in the board needs to be regulated

===To Do===
  * Ask firmware where to locate cranberry's code 
        - change the address to relay Xbee 
  * Finish preparation for deployment
       - make sure relay Xbee receive packets from cranberry and be able to transmit to gateway

==== Meeting Minutes November 2, 2018 ====
**Attended: Mizpah, Sharmaine, Xiao**

=== Updates === 
  * Deployment Day
         - Was able to transmit before closing (taping) the box
         - After clamping the box, it wasn't transmitting any data - not sure whether it is the Bumblebee or Cranberry's board
         - Since we ran out of time, we decided not to deploy.
         - Also decided to hold off on deploying Bumblebee until we have our PCB board ready. Figured out that the connections are not stable since we are using wires.

==To Do===
  * CDR Presentation on Saturday, November 10
  * Work on CDR Powerpoint Presentation
  * Work with Andrew to fix our code
          - Handling more than one packet