==== Meeting Minutes April 16, 2018 ====
**Attended: Alex(s), Kayla**

=== Updates === 
  * Deployed at Andrew's house
    * Boards worked well inside, but Bumblebee failed outside
      * Box started to whine and stopped transmitting when solar panel created a spike in voltage
      * Possible cause: single voltage regulator on PCB is not enough to handle power provided by the panel

===To Do===
  * Figure out why the board doesn't respond well to power from the solar panel
    * Measure current/voltages to and from the panel with the battery and simulated sunlight
  * Possibly deploy second board

==== Meeting Minutes April 20, 2018 ====
**Attended: Alex(s), Kayla, Becky**

=== Updates === 
  * Tested previously deployed Bumblebee with solar light in the lab
  * Removed voltage regulator on board to see if the problem was a current draw problem
  * Attempted to use a through hole voltage regulator with a higher current output
  * Tested other board with solar light to see if that board also had a problem
  * Noticed that second board's voltage from the solar charging chip would fluctuate when the board or panel would be moved
  * Noticed the male barrel jack on the solar panel that was deployed was broken
  * Tested board with new panel and there was no buzzing like there was on the deployed board
  * Voltages on board with new panel stayed constant

===To Do===
  * Test new board with new panel to see if it can send packets
  * Replaced voltage regulator on first board
  * Create a new housing for second board
  * Deploy!