===== Week 14 =====

==== Meeting Minutes November 27, 2018 ====
**Attended: Mizpah, Sharmaine, Xiao**

=== Updates === 
  * Changed XBee header 
  * Tried transmitting using the relay, however, the coordinator did not receive any packet.
     - we thought relay XBee is not transmitting because the header pin for the TX is broken
     - still not transmitting after we changed the header

===To Do===
  * Contact Andrew for help

==== Meeting Minutes November 28, 2018 ====
**Attended: Mizpah, Sharmaine, Xiao**

===Updates=== 
  * Andrew checked the connection of the XBee again and suggested two possible solutions:
     - change the Destination Address for the sending XBee to default (0x00, 0xFFFF) on both the code and XCTU
             - this will determine whether the sending XBee is communicating with the other XBee
             - coordinator received packets directly from sending XBee
     - change relay XBee
             - still didn't transmit --> coordinator didn't receive any packet
  * Used an Arduino board and uploaded relay code to act as the relay node
     - coordinator received packets from relay XBee

===To Do===
  * Work on Final Presentation PPT 

==== Meeting Minutes November 30, 2018 ====
**Attended: Mizpah, Sharmaine, Xiao**

===Updates=== 
  * Updated meeting minutes on wiki
  * Updated Readme.md and code on Github
  * Finish Final Presentation PPT

===To Do===
  * FINAL PRESENTATION tomorrow 12/01/18