===== Week 3 =====

==== Meeting Minutes February 3, 2020 ====
**Attended: Sharmaine, Mizpah, Arnold, Raellis**

=== Updates === 
  * Did Line of Sight Testing 30-390 feet (3 trials each 30 feet)
  * Good results; most 100& data packets sent, lowest 93.33%
===To Do===
  * Debug PCB from last semester

==== Meeting Minutes February 5, 2020 ====
**Attended: Sharmaine, Mizpah, Arnold, Raellis**

=== Updates === 

  * Talked with Dr. Kuh
  * Taught Arnold and Raellis a lot of bumblebee
  * Configured Xbee S2C (coordinator, relay, send)
  * 1 Uploaded Code to Atmega328P
  * 2 Coordinator and Relay were not detecting Router Xbee; updated firmware and was able to detect
  * 3 Coordinator is not receiving any packets
    * 3a. Relay debug LED is not lighting up; no packets are being received or sent
    * 3b. May need to recheck code that was uploaded
  * 4. Compared working relay code and old relay code
    * 4a. Found that the LED was not declared correctly; originally declared as int led=9
    * 4b. Changed it to #define led 9 (??????????)

===To Do===
  * Continue debugging old PCB 
  * Range test Xbee S2C
  * Find compatible 5V regulator
  * Fabricate a new board that will incorporate Sparkfun 5V regulator
    * Use thru holes (header)
    * try to finish PCB design by next week Wednesday 2/12