==== Meeting Minutes March 12, 2018 ====
**Attended: Alex(s), Kayla**

=== Updates === 
  * Prepped second board for bootloading and programming
  * Continued to test code on first board

===To Do===
  * Bootload and program second board

==== Meeting Minutes March 16, 2018 ====
**Attended: Alex(s), Kayla**

=== Updates === 
  * Unable to bootload second board because board cannot be detected.
  * Programmed first board but Xbee cannot be kept in always awake mode. Can only be kept in cyclic sleep mode.

===To Do===
  * Cut the connection between the microcontroller and the Xbee sleep command pin and have Xbee set to always on mode in XCTU
  * Rewire second board and check connections in the bootloading circuit setup.