=====Week 9=====
====Meeting Minutes March 14, 2017====

**attended: Isaiah, Kayla**

=== Updates ===
   * Tried to re-burn the bootloader of our atmega to run using its internal 8 Mhz clock
     * unable to burn it
   * Tried using 2 3.3V regulators
     * one to power the xbee and the other for the atmega
     * xbee needs at least 3.3V to run (nothing below that)

====Meeting Minutes March 16, 2017====

**attended: Isaiah, Kayla**

=== Updates ===
   * The Xbee is able to receive packets when getting only 2.8V
     * Only works when the atmega is receiving 5V, but not 3.3V
     * Only works with the 16MHz clock and not the 8MHz clock
   * Re-burned the bootloader with "Arduino Pro or Pro mini" "ATmega328 (3.3V, 8MGz)"
     * Was able to program the atmega using an external 8MHz clock
     * Was able to receive one packet with no errors. Got errors for any packet after that
     * Now for some reason unable to program or receive packet