=====Dragonfruit Team Meeting #24 - April 18, 2016=====
Attended: Brian, Garrett, Kyle, Brianne, Keane, Kevin

==== Updates ====
  * Did greetings and introductions.
  * Gave out assignments for the x296 and x196 students to work on.

==== Problems ====
  * N/A

==== Goals for this week ====
  * Research Charging Chip, Micro-controller, Board designs, and to look at Sketch-Up.
  * Charging Chip: Read data-sheets.  Get a firm understanding.   
    * Research other charging chips to improve board efficiency and so that it's easier to solder.
    * Current charging chip is limited to 3.3V other charging chips can handle higher voltages.
    * Instead of using voltage regulators and boost converters, use step up and step down (which can be done with one chip.)
    * Check Pololu on their page.  Pololu is a QFN and someone needs to learn how to solder it.
  * Micro-Controller: Research for other options.
    * Research for a microcontroller with more input and output ports.
    * Current microcontroller is a 328p, use micro controller from same family.  This will make it easier for firmware to adapt.
  * Board: Expand on the board.  (Possibly change the size and design.) 
  * Sketch Up: Download and play around with it.  Get some experience with the software.
  * Extra Information: Differences between Dragon Fruit and Cranberry.
    * Dragon Fruit runs on 5V while Cranberry runs on 3.3V.  
    * Dragon Fruit runs off of a 16Mhz Clock.
    * Cranberry runs off of a 8Mhz Clock.
    * Look over datasheets to see why this happens.

==== Reminders ====
  *