=====Dragonfruit Team Meeting - October 16th, 2017=====
Attended: Kevin, Kyaw, Tyler

==== Updates 10/16 ====
  * Started soldering circuit

==== Updates 10/19 ====
  * Continued soldering
  * Found 0 ohm resistor (pkg 0805)
  * Tested using heat lamp 
    * Voltage across VCC on the charging ckt (on board) spiked whenever we turned on the heat lamp to simulate the sun
    * Spiked to ~6.4V and suddenly dropped back down to ~4 V
    * This could be one of the problems why the board keeps dying
    * Potential solutions: 
      * Capacitor (choose a right value?)
      * If the voltage spike is due to current, we could use an Inductor 
==== Tasks ====     
  * Review csv file for Weatherbox deployment analysis
  * Code an arduino to monitor current drawn by charging chip
  * Start soldering next week (Tyler)
    * Start with charging chip
  * Investigate short circuit current of solar panel (Kyaw)