====== Resources ======
=====Programming Instructions=====
  - Use the Arduino IDE to program the device using the AVRISP MkII Programmer.
  - Use an ISP connector to attach the programmer to the DragonFruit board.
  - Connections: MISO (1), VCC(2), SCK(3), MOSI(4), RESET(5), and GND(6).
  - Make sure that you have the right board selected: Arduino Uno w/ Atmega328.
Note: Board must be powered using an external voltage source (e.g. battery or generator).

----

=====Eagle Tutorial=====
  - [[https://www.youtube.com/watch?v=1AXwjZoyNno|Creating Schematics]]
  - [[https://www.youtube.com/watch?v=CCTs0mNXY24|Creating Board]]
  - [[https://www.youtube.com/watch?v=oId-h6AeXXE|Generating GBR files]]


----

===== Ready to Design and Fabricate? =====
Tips on how to design a professional PCB can be found [[weatherbox:dragonfruit:PCB Rules|here]].

Steps on how to send your design to a professional manufacturer can be found [[weatherbox:dragonfruit:CAM Job|here]].