=====Connecting/Debugging Apple=====
Purpose: Help those who wish to run software debugging on the current (as of 10/16/2015) Apple board.
=====Problem=====
When the Arduino is connected to the Apple board, it is near impossible to have the USB cord connected to Arduino to run the Serial Monitor (tool for debugging).
=====Solution (Tentative)=====
  - De-solder the pins and components in the way
=====Solution=====
  * Request a re-design of the Apple board
  * Attempt wireless debugging
  * Use hardware-independent code (when it's completed)
=====Disclaimer=====
This error was encountered by us, in our attempt to verify that the sensor code polls data.  We were only seeking to receive noise data, as we have chosen a board that is missing many of its components, which is what led to our tentative solution.