====== Meeting with Jon ======
===== Pre-Questions =====
  *I2C stuff
  *0 ohm resistors
  *giant cap on the charging circuit
===== Minutes =====
  * Don't use less than 10 mils in the traces
  * Don't start from scratch with Apple
  * The current schematic is crowded
  * first step would be to clean up
  * JOn's rules use groups
  * Group 1 would be power
  * Group 2 would be ic sensors
  * stay away from large traces that go across the entire page, instead use the label tool
  * don't use the ticket labels for power/ use the arrows 
  * clean up the current schematic/ make it easier to follow the traces
  * SECTIONED APPROPRIATELY (have clear things)
  * TECHNICAL DETIALS (NAME AND VALUE) (ratings and tolerances on the schematic)
  * the 0 ohm resistor is a JUMPER used for getting faster
  * maybe break things up to
  * 1. schematic [electrical aspects]
  * 2. assembly guy (parts and assembly) [inbetween both mech and elec]
  * 3. housing guy (the box and stuff) [mechanical]
  * Bill of material to start things off.
  * The thru holes are bigger. SM are smaller/ on a professional level reducing space cuts costs as well
  * need to watch the plugged in programming (debugging)
  * layout do it on the prof lisc. the schematic can be done on the free vers.
  * make sure you have the things linked (make sure to keep the things updated)
  * parts lists of the housing stuff including the misc elec items like the headers

*[[Meeting Minutes 10/13/15]]