#include <OneWire.h>\\
#include <DallasTemperature.h>\\

OneWire oneWire(A2);\\
 
DallasTemperature sensors(&oneWire);\\


DeviceAddress insideThermometer;\\

void setup() {
  Serial.begin(9600);
  sensors.begin();
  //set the address to take temperatures
  sensors.getAddress(insideThermometer, 0); 
}

void loop() {
  //get temperature from sensor
  sensors.requestTemperatures();
  
  delay(1000);
  //get the value of temperature in Celsius and set to tempC
  float tempC = sensors.getTempC(insideThermometer); 
  
  Serial.print("Temp C: ");
  Serial.print(tempC);
  Serial.print(" Temp F: ");
  //convert temperature in C to F
  Serial.println(DallasTemperature::toFahrenheit(tempC));
}