FOLLOW REIS SCHEMATIC!!!!! Except for solar irradiance (Green is voltage, clear is ground)

Pressure sensor
	Temperature: 22 C
	Heated up under lamp
	Only Celsius readings

Humidity and sensor temperature
	Temp: 25 C
	Celsius and Fahrenheit

Temperature
	Temp: 25.5 C
	Measures Celsius and Fahrenheit
	Only changes by half a degree

Charging Circuit Readings
        Voltage Source Only:
        Input (V)             Load Output
        4                     0.8 
        4.6                   4.42 
        5                     4.87
        5.5                   5.35
        6                     5.84
        6.3                   6.14
      
        Battery Only:
        Input (V)             Load Output
        3.81                  3.81
        
        Voltage Source and Battery:
        Input (V)             Load Output
        4                     3.82
        5                     4.56
        5.4                   4.55

Xbee and pressure sensor needs 3.3V.

Analog read for solar irradiance
Change conversion (multiply value by 1000 from V to mV)
Maxes out at 1246ish