1. Verify sensors on wiki are correct.\\
2. Ask about current progress on board, try to get a date.\\
3. Ask about quirks of board.\\
4. Ask about features they want to implement in the future.\\

  * Sensors
    * Humidity sensor is humidity and temperature
    * Has a GPS sensor but this is not a priority
    * There is a current sensor 
  * Future Apple iterations
    * Only change would be GPS


==== Andrew's Notes ====
 - GPS takes up 16% of data memory \\
 - Software Serial takes ~7% of data memory \\
 - With GPS Library memory is filled and the microcontroller will not work \\
 - Need to find a way to reduce initialize memory to about 90% \\
 - TinyGPS Library??? \\

 - If not programming properly: check tx and rx pins on Apple board. Make sure they are cut off. \\