====== Weekly Meeting- September 18, 2014 ======
**Attended: Dr. Kuh, Andy, Zach, Conrad, Sean, Daisy, Ryan, Liane, Christie**

=====Funding=====
  * College of Engineering Funding
    * Up to $10,000
    * Can get funding for equipment
    * Dr. Kuh will write proposal for this
    * Due tomorrow, 9/19!
  * $2000 CTAHR Funding
    * Need to present at CTAHR poster session in Spring
    * Zach, Conrad, Ryan, Christie, and Daisy should write proposal for this
  * $2000 COE Research Experience for Undergraduate
    * Zach, Conrad, Ryan, and Christie should write proposal for this
    * Two pages long
    * Budget- equipment
      * Zach and Conrad- boxes
      * Christie and Ryan- data visualization
        * Computer support for T-REX
    * Due tomorrow, 9/19!
  * UROP Funding
    * Up to $5000
    * Due 10/10
  * Request to Department
    * Dr. Kuh going to request $10,000-$20,000

=====Zach and Conrad’s Presentation on EE496 Project=====
  * Cranberry
  * Two boards: sensor and main board
    * Sensor will be outside box so it can be exposed to the environment
    * Main board will be protected and enclosed in box
    * Two boards can be detached
      * Can test sensor board separately
  * Use tripod to mount box
  * Housing
    * Will be printed by 3D printer
    * Reinforce housing with fiber glass
  * Goal to get hardware and software done by end of semester
  * Additional things to do:
    * Dr. Kuh wants a presentation that can be given to Facilities
      * Several slides long and plan to finish box
    * Make a Gantt chart to plan how goal will be met
    * Costs for box

=====Reflow Oven=====
  * Jesse working on reflow oven now

=====Dr. Kuh=====
  * Matt from Referentia on island for a couple of weeks
    * Christie needs to gather questions
    * Issue of deleting nodes
    * Talk with HECO
      * Lauren and Talon talk to us about how they are using TREX
  * Set up meeting at facilities
  * Redeploy boxes on Holmes and at Hokulani
  * HNEI
    * Have data
    * Daisy contact Severine
    * Daisy will make wind sensor and calibrate with that data

=====Next week’s meeting at 11:30 am=====
  * Status of everything in lab