====== Weekly Meeting- September 4, 2014 ======
**Attended: Dr. Kuh, Andy, Zach, Sean, Conrad, Jessie, Ryan, Daisy, Yoshi, Liane, Christie**

=====Yoshi’s Presentation on wind sensor=====
  * Using hot-wired sensor
    * Temperature of sensor changes with wind speed
    * Need to adjust to ambient temperature
    * Placing four of them in NESW directions
    * Use vectors to calculate direction of wind
  * Created PCB board and housing for sensor unit
  * Could include budget and power consumption

=====Weekly Meetings=====
  * Will have meetings at 11:00
  * Christie and Ryan will give a presentation on their EE396 project next week

=====Parts=====
  * All the parts have arrived
  * Parts just need to be put together

=====Software=====
  * Software meeting
    * Zach will send out doodle to find good time

=====3D Printing=====
  * Jessie will be in charge of 3D printing
  * Eric will be helping with 3D CAD
    * Will work with whoever else is working with the 3D printing

=====Reflow Oven=====
  * Jessie will finish reflow oven
  * Just need to put in software and test it

=====Dr. Kuh=====
  * Talked with HNEI
    * Will want help eventually
  * Will email data from 15 months to Christie
  * Dr. Garmire built indoor sensors

=====D&B=====
  * Yoshi leaving on Sunday
  * Will go to D&B on Friday, 9/5/14 at 6 pm
  * Meet at lab at 6 pm and will carpool there

=====Talk by Maria Tome=====
  * Holmes 244 at 4pm