=====Wind Sensor Team Meeting- December 2, 2016=====
**Attended: Mengyuan, Creighton, Scott **
=====Updates=====
  * Received anemometer data acquisition software and got it to work
  * Got the old PCB to work by jumping connections over faulty traces
  * Peak detector parameters adjusted to smooth raw data of old Teensy PCB (see Problems)
=====Problems=====
  * Raw data from old PCB doesn't match raw data from single microphone tests
  * New mapping of raw data to wind speed maps some higher wind speeds to smaller peak detector values
  * The old Teensy PCB results do not match Andy's results
      * Maybe need to re-adjust alpha value of peak detector
=====Reminders=====
  * To Do:
      * Replicate Andy's test and results with four microphones and in different environments 
      * Finalize PCB design for milling
      * Etch/mill PCB 
      * Consider implementation of rms chip