We are the only group currently using the Arduino
The red thing is a boost converter that boosts 3.7V to 5V
Xbee runs at 3.3V. (There is a separate regulator to convert that.)
There is a mystery humidity sensor.
There's 2 humidity sensors. One is on the pressure sensor, but they work differently.
Andy was mistaken about the power.
Battery fully charges around midday.
The panel never directly powers the circuit. It only powers the charging circuit to charge the battery.
Pressure and current sensor is connected to the I2C.
GPS is used for having a lot of weather boxes set up, and you can tell which one/where the one we need is located. (Buoy Example)
Kenny is gonna make a core program for us to play around with the hardware we have something to test out.
By the end of the week, we'll have a program for the arduino that can access all the different sensors and see if they work.
Start talking to the other teams for advice about the troubles that we are having
“Hey, were confused about this. Help?”
By asking questions, this takes care of the overlap among the teams.
Kennys always willing to help