Update Keoni and Noah about Apple v4.1.1 and Apple v4.1.0
Archiving Wiki Apple Spring 2019
We were able to send data packets to the firmware database
Trying to fix voltage problems
Update Eagle schematic and PCB to have the RX connected to pin 2 and TX connected to pin 9 on the Pro Mini.
Continue making more PCB boards and taking apart the old ones to reuse their female/male headers
Update Wiki
Convert Eagle Files to Gerber Files: Make sure to be in “Board Eagle Window”
change with the dimension readings from “inch” to “mm” since SEEED Studio only takes
them in “mm”, right click on the dimension arrows where it'll eventually light up and pop-up options
→ Properties → click on “Unit” to change from inch to mm then follow below
→ File → CAM Processor… → CAM Processor window will pop-up takes 3 seconds
→ check box “Export as ZIP”, you may check over the individual layers on the left side under “Gerber”
→ Finally click “Process Job” → save the ZIP file in your desired directory → OK → “Discard”
To save pictures of the Eagle Schematic and Board:
SEEED Studio Options
→ Google “seeed studio pcb” → click on “Fusion PCB/PCBA - Seeed Studio” → Add Gerber Files
→ Mostly everything stays the same except the dimensions *Units in mm, desired PCB color,
and maybe the number of layers if more than the usual 2 layers (or less)