=== Mesh Network Set up (Many-To-One) ===
=== Testing the XBees Communications ===
Using the laptop containing the coordinator (
API 1 XBee or SENDER):
Using the laptop contained the router (Relay_1):
Using the laptop contained the second router (Relay_2):
After finishing the placement of the three XBees communicate from Relay_2 by creating packets
Relay_1 should receive the packets as
ASCII values
SENDER should receive the packet as
ASCII values and also the address of Relay_2
After verifying that all 3 Xbees are communicating start a range test with SENDER computer
=== Testing with PCB ===
Place Relay_1 XBee on PCB
Connect PCB to battery
Same configuration of XBees similar to above where starting from beginning it will be: Sender→Relay_1→Relay_2
Start by sending packets from Relay_2 and see if Sender is receiving packets
Start range test with Sender computer
Complete range test
References:
Authors
Contributing authors:
fsonoda
lcorpuz
Created by lcorpuz on 2021/04/02 22:42.