Attended: Sharmaine, Mizpah, Arnold, Raellis

• Did Line of Sight Testing 30-390 feet (3 trials each 30 feet)
• Good results; most 100& data packets sent, lowest 93.33%

• Debug PCB from last semester

Attended: Sharmaine, Mizpah, Arnold, Raellis

• Talked with Dr. Kuh
• Taught Arnold and Raellis a lot of bumblebee
• Configured Xbee S2C (coordinator, relay, send)
• 1 Uploaded Code to Atmega328P
• 2 Coordinator and Relay were not detecting Router Xbee; updated firmware and was able to detect
• 3 Coordinator is not receiving any packets
  • 3a. Relay debug LED is not lighting up; no packets are being received or sent
  • 3b. May need to recheck code that was uploaded
• 4. Compared working relay code and old relay code
  • 4a. Found that the LED was not declared correctly; originally declared as int led=9
  • 4b. Changed it to #define led 9 (??????????)

• Continue debugging old PCB
• Range test Xbee S2C
• Find compatible 5V regulator
• Fabricate a new board that will incorporate Sparkfun 5V regulator
  • Use thru holes (header)
  • try to finish PCB design by next week Wednesday 2/12

Contributing authors:

Created by ryoung on 2020/01/23 02:36.