Table of Contents
Updates
Problems
Solutions
Reminders
Authors
Updates
Worked on debugging the board
Worked on programming the Cranberry
Problems
all 3 boards had problems
3.2 and red 3.5: humidity and pressure sensor doesn't work
2nd 3.5: won't program, doesn't sync
Solutions
3.2: had to resolder the manually placed wires because they were wrong (still doesn't work)
red 3.5: tried replacing pressure sensor - won't come off (still doesn't work)
2nd 3.5: re-soldered the clock (still doesn't work)
Reminders
Solder humidity sensor to a new board for Dylan
Power budget
PDR Presentation
Reprint Housing if there is time
Authors
Contributing authors:
jchun
Created by
jchun
on 2016/09/30 03:47.