Members present: Roel, Alex, Juliana, Kayla

• populated another Rev DII board
  • need to label value of R10 as 270kohm

Members present: Alex, Marvin, Donovan, Juliana

• 296 (Elle and Dylan) shadowed
• bootloaded and tested new Rev DII board
• Declared blue dot board as dysfunctional; do not continue testing with it
• Breaking the connection on the PCB to Vboard (free floating) causes battery and solar panel voltages to result in incorrect readings
  • using the voltage divider: battery voltage results in about 3.3V
    • need to bring value below Vcc

Contributing authors:

Created by changjul on 2022/04/07 02:27.