Don't use less than 10 mils in the traces
Don't start from scratch with Apple
The current schematic is crowded
first step would be to clean up
JOn's rules use groups
Group 1 would be power
Group 2 would be ic sensors
stay away from large traces that go across the entire page, instead use the label tool
don't use the ticket labels for power/ use the arrows
clean up the current schematic/ make it easier to follow the traces
SECTIONED APPROPRIATELY (have clear things)
TECHNICAL DETIALS (NAME AND VALUE) (ratings and tolerances on the schematic)
the 0 ohm resistor is a JUMPER used for getting faster
maybe break things up to
1. schematic [electrical aspects]
2. assembly guy (parts and assembly) [inbetween both mech and elec]
3. housing guy (the box and stuff) [mechanical]
Bill of material to start things off.
The thru holes are bigger. SM are smaller/ on a professional level reducing space cuts costs as well
need to watch the plugged in programming (debugging)
layout do it on the prof lisc. the schematic can be done on the free vers.
make sure you have the things linked (make sure to keep the things updated)
parts lists of the housing stuff including the misc elec items like the headers