XBee + Arduino Sending Packet API Mode
Packet Sending: to Arduino XBee
Packet Sending: from Arduino XBee
You must download the XBee Library for Arduino!
Packet Receiving XBee
Packet Sending XBee
Go to Arduino→File→Examples→XBee Library→Series2_Tx Example
You must download it as a binary file
Got to Arduino→Sketch→ Export File Binary
Check it compiles
Change the SH + SL Address of receiving XBee to the address you wrote down previously
Check it compiles and upload to the Arduino
Wire up board with Arduino and XBee (Make sure XBee TX goes to Arduino RX and XBee RX goes to Arduino TX)
Bringing two components together
Open XCTU and go to the Console Log screen
In Arduino, open the Serial Monitor
You should receive a packet in XCTU and the XBee Serial Monitor should say it received data
CONGRATS! You sent a packet :D
Authors
Contributing authors:
jobatake
Created by jobatake on 2016/03/06 01:49.