Monday, February 15th, 2021
Members present: Marvin, Ryan
Tuesday, February 16th, 2021
Members present: Marvin, Ryan
ISSUE SOLVED: capacitor was connected improperly
Just kidding, still got error; “programmer is not responding”
Redid wiring on breadboard
ISSUE ACTUALLY SOLVED: Upon rewiring, noticed there was mysterious power wire connected to pin 6 on ATmega; reran blink and bme280 sensor example codes, no errors
Started implementing apogee sp-215 to bare arduino
Friday, Friday 19th 2021
Members present: Marvin, Ryan
Authors
Contributing authors:
msalcedo
Created by msalcedo on 2021/02/16 03:09.