Attended: Keoni, Daisy, Andy, Scott, Alex

• Introductions
  • Alex met Daisy and Andy.
• Teensy Presentation (by Keoni)
  • Talked about how to use the Teensy in conjunction with the Arduino software
• Anemometer Presentation (by Scott)
  • Scott researched some anemometers
    • Needed more depth, so scott will do more research
• Matlab
  • Alex - should start learning Matlab
• Wind Measurement
  • Want to measure more reliably
  • Want to be able to concentrate wind in a specific area
    • Potentially create dual-pipe system (one for control & another for experiment)
  • How can we use the light dimmer in our testing?
• Report
  • Recapping of experiments
    • Make sure to write down what methods were used and what graph it corresponds to
  • Re-ordering sections of the report
  • Talk about the fundamentals more
    • Basic idea behind the project
    • Basic process used for the project

• To Do:
  • Scott - Draw sketch of potential structure to use for wind speed testing
  • Keoni - Gather test data using Teensy
  • Bin - RMS chip report
  • Alex - Do Matlab and Arduino work

Contributing authors:

Created by daveyk on 2016/03/19 01:27.