Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== 3D Printing Software ====== Below are the software programs that are available for free to those who want to 3D print. You should be able to print out anything you create with these. Most of the files that are created with this should also work with any 3D printer on campus. * [[https://ultimaker.com/en/products/cura-software|CURA]] * [[http://www.repetier.com/|Repetier]] * [[http://www.sketchup.com/|SketchUp]] * [[http://www.123dapp.com/|Autodesk 123D]] To get your item 3D printed, please go to: * FabLab * iLab (Building 37) * Electrical Engineering Project Room (Holmes Hall 450) * Will need to apply for a room code and ask for the lab technician to help you out training/3d_printing_software.txt Last modified: 2021/09/19 21:59(external edit)