Attended: Mizpah, Sharmaine, Xiao

• Andrew mentioned that it's up to us whether or not we redesign our PCB
• We'll try to build our bare Arduino board and have it run at 5V and 16MHz to check if it works.
  1. Bare Arduino works with 5V, 16MHz
• Finished modifying schematic and PCB –> Atmega runs on 5V, Xbee runs on 3.3V
  1. Ordered new PCB and 5V regulator

• Have to make Bare Arduino run on 3.3V with 8MHz while waiting for new PCB and voltage regulator to be delivered

Attended: Mizpah, Sharmaine, Xiao

• We ordered more XBees, capacitors, and clocks to use up our Ron Ho fund.
• We also ordered 3.3V 8MHz bootloaded atmegas.

Contributing authors:

Created by xchen on 2019/04/11 23:50.