To help understand the boards parts, Diwen read through the board schematic to further help with the debugging. Even though we felt that the defunct board was unusable there still was a learned a lesson to be learned from it. Aljaed and Rammell got down to working out ideas on how to make Revision C manufacturable in a bigger scale.

Diwen applied to become a part of the list to receive Ron Ho forms. Furthermore, the team decided on not completely overhauling the design but just changing the part sizes. This is to combat the time sink of populating the board, which when not done properly could very well mark the end of the boards usability as shown by the board from weeks prior.

Contributing authors:

Created by aereno on 2019/09/29 04:59.