• I2C stuff
• 0 ohm resistors
• giant cap on the charging circuit

• Don't use less than 10 mils in the traces
• Don't start from scratch with Apple
• The current schematic is crowded
• first step would be to clean up
• JOn's rules use groups
• Group 1 would be power
• Group 2 would be ic sensors
• stay away from large traces that go across the entire page, instead use the label tool
• don't use the ticket labels for power/ use the arrows
• clean up the current schematic/ make it easier to follow the traces
• SECTIONED APPROPRIATELY (have clear things)
• TECHNICAL DETIALS (NAME AND VALUE) (ratings and tolerances on the schematic)
• the 0 ohm resistor is a JUMPER used for getting faster
• maybe break things up to
• 1. schematic [electrical aspects]
• 2. assembly guy (parts and assembly) [inbetween both mech and elec]
• 3. housing guy (the box and stuff) [mechanical]
• Bill of material to start things off.
• The thru holes are bigger. SM are smaller/ on a professional level reducing space cuts costs as well
• need to watch the plugged in programming (debugging)
• layout do it on the prof lisc. the schematic can be done on the free vers.
• make sure you have the things linked (make sure to keep the things updated)
• parts lists of the housing stuff including the misc elec items like the headers

*Meeting Minutes 10/13/15

Contributing authors:

Created by dkvilla on 2015/10/13 23:47.