Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Hardware Meeting - April 15, 2015 ====== **Attended: Andy, Conrad, Jon, Christie** ====== Updates ====== * Parts request is due tomorrow * Reflow station * Fume extractor is estimated to be $1000 * Reflow station is estimated to be $1000 - first priority * Anti static mat * 2x3 feet - $54 on amazon * purchase two ====== Conrad ====== * Will fix issue with op amp ====== Jon ====== * Will post spreadsheet with reflow station, fume extractor, and anti static mat * Will start the third revision on the board * Charging chip may not be working due to a possible grounding issue ====== Alex ====== * Still redesigning the PCB to fit new requirements weekly_hardware_meetings/april_15_2015.txt Last modified: 2021/09/19 21:59(external edit)