weekly_meetings:october_9_2014

Weekly Meeting- October 9, 2014

Attended: Dr. Kuh, Andy, Kenny, Zach, Sean, Conrad, Daisy, Liane, Christie

  • Fill out GoogleDoc biographies- need for IAB visit
  • Still need pictures
  • HOBO Wind Sensor Set
    • $560
    * Use for calibration
    * Measurement range from 0 to 100 mph
    * Lasts about 5 years
    * Accuracy 1.1 m/s or 4%
  * Yoshi used hotwire anemometer
  * Ultrasonic
  * Use microphones to make wind sensor
    * Four microphones facing NESW
    * Two microphones in perpendicular tubes and one outside
    * About $6.95 per microphone
  • Test Yoshi’s wind sensor
  • Fourier Transform on Arduino
  • Get data from Severine or NREL
  • Modularizing hardware and software
  • Zach recently finished a software driver
    • Can test module on computer independent from hardware
    • Assumes hardware is working properly so software only tested
    • On Github
  • Ryan working on website
  • Christie finalized Python plotting module
  • IAB visiting on Thursday of next week
  • Will probably be after lunch time
  • Dr. Kuh trying to schedule meeting with facilities
  • Also trying to set up meeting with Dora from HECO
  • Dora may come by the lab this afternoon before lecture
  • Conrad finishing main board and power
  • Starting to work on sensor board
  • Will then work on developmental part
  • Hardware meeting on Monday, October 13, at 2:30 pm
  • Dr. Kuh, Andy, and Liane will meet at 9:00 on Monday
  • Andy will send out reminder email
  • Next meeting in two weeks will be at 11:00
    • Conrad and Zach will present the week after career fair
  • Following meeting in three weeks
    • Christie and Ryan will present updates

Authors

Contributing authors:

cobatake

Created by cobatake on 2015/09/28 09:37.

  • weekly_meetings/october_9_2014.txt
  • Last modified: 2021/09/19 21:59
  • (external edit)