Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Wind Sensor Team Meeting- December 2, 2016===== **Attended: Mengyuan, Creighton, Scott ** =====Updates===== * Received anemometer data acquisition software and got it to work * Got the old PCB to work by jumping connections over faulty traces * Peak detector parameters adjusted to smooth raw data of old Teensy PCB (see Problems) =====Problems===== * Raw data from old PCB doesn't match raw data from single microphone tests * New mapping of raw data to wind speed maps some higher wind speeds to smaller peak detector values * The old Teensy PCB results do not match Andy's results * Maybe need to re-adjust alpha value of peak detector =====Reminders===== * To Do: * Replicate Andy's test and results with four microphones and in different environments * Finalize PCB design for milling * Etch/mill PCB * Consider implementation of rms chip wind_sensor/meeting_minutes_december_2_2016.txt Last modified: 2021/09/19 21:59(external edit)