Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Wind Sensor Team Meeting- November 17, 2015===== ** Attended: Daisy, Keoni, Jeremy ** =====Updates===== * We are working on the final code for wind sensor set-up * We are soldering a test PCB board for the four microphones * We fitted the predictive angle on MATLAB * We are refitting Andy's amplitude code without the realtime process function ===== To Do ===== * Continue all stated above * Convert MATLAB to arduino * Work on CDR presentation wind_sensor/meeting_minutes_november_17_2015.txt Last modified: 2021/09/19 21:59(external edit)