Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Wind Sensor Team Meeting- October 22, 2016===== **Attended: Mengyuan, Creighton, Scott ** =====Updates===== * Analyze frequency domain of one microphone at different fan settings * Analyze the cepstrum coefficients of each data set * Consider looking at other frequency domain information ===== Problems ===== * Still need to verify Andy's results with multiple microphones at multiple fan settings * Need to understand what information the cepstrum coefficients contain =====Reminders===== * To Do: * Replicate Andy's test and results with four microphones and in different environments by the end of this week * Design a PCB by the end of this week * Etch/mill PCB by the first week of November * Implement a hardware solution that will output 1 normally and will output 0 when the amplitude of the waveform is greater than a certain threshold. wind_sensor/meeting_minutes_october_22_2016.txt Last modified: 2021/09/19 21:59(external edit)