Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Wind Sensor Team Meeting- September 15, 2015===== **Attended: Daisy, Jeremy, Keoni** =====Updates===== * Read Andy's MS thesis =====Problems===== * None =====Reminders===== * To Do: - Bring a 9V battery for the digital anemometer - Housing - Make a smaller housing (with 3D printer) - Make sheet with slits for testing - New set up - Buy lazy susan - Print angles and rulers - velcro - level - foam - Test all mics for consistency - Figure out how to get real time data from Digital anemometer wind_sensor/meeting_minutes_september_15_2015.txt Last modified: 2021/09/19 21:59(external edit)