Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====Wind Sensor Team Meeting- September 9, 2016===== **Attended: Mengyuan, Scott ** =====Updates===== * Worked on proposal presentation: * Goals for the semester: * create a deployable wind sensor * conduct tests in a variety of situations * conduct tests with a variety of different wind sensors: anemometer, arduino, teensy, weatherhawk * automate testing through Matlab * Learning Expectations * Arduino programming * Digital and hardware filtering methods * 3D printing and etching * Digital Signal Processing =====Reminders===== * To Do: * Create a test bench using Matlab * Create test circuit with the teensy on a perforated board wind_sensor/meeting_minutes_september_9_2016.txt Last modified: 2021/09/19 21:59(external edit)