wind_sensor:metting_minutes_february_5_7_8_9_2018

This is an old revision of the document!


Date: 5 February 2018

  • New fan should be a square shape
  • Wind tunnel material possibilities: plexiglass and cardboard
  • Grate works as a wind straightener: bunch of straws
  • The fan will be sucking wind through the wind tunnel, instead of blowing into
  • Deciding how long the wind tunnel should be:
  • Deciding factor is the wind tunnel's storage.
    • Which would be on top of the microwave of HH 492, 1240 mm, or on the higher shelf with a length of 1870 mm.
  • wind_sensor/metting_minutes_february_5_7_8_9_2018.1517864727.txt.gz
  • Last modified: 2021/09/19 21:59
  • (external edit)