Differences

This shows you the differences between two versions of the page.

--- wind_sensor:meeting_minutes_september_17_2016 [2016/09/23 11:46]
snishihara created
+++ wind_sensor:meeting_minutes_september_17_2016 [2021/09/19 21:59]
@@ Line 1: / Line 1: @@
-=====Wind Sensor Team Meeting- September 17, 2016=====
-**Attended: Andy, Daisy, Mengyuan, Creighton, Scott **
-=====Updates=====
-  * Tested the teensy on a breadboard with one microphone wi
-      * Verified that the teensy works
-  * Teensy is not supported by Matlab
-      * Devise a new way to collect data
-          * Hard-code a timer to stop collecting data after a number of samples
-          * Copy data from the serial monitor into Excel and Matlab for signal processing
-          * Testing is not automated and data isn't real time
-        * Learning Expectations
-            * Arduino programming
-            * Digital and hardware filtering methods
-            * 3D printing and etching
-            * Digital Signal Processing
-  * Other possible testing methods
-      * Use a plastic bag around a fan and PVC pipe, with PVC pipe in front of sensor to act as a wind tunnel.
-      * Improve "lazy susan" used for testing by using a stepper motor to rotate the angle of the wind sensor.
-=====Reminders=====
-  * To Do:
-      * Re-derive equations to translate amplitude to wind speed
-      * Re-create experiments and data from Andy, Daisy, Jeremy and Keoni to understand the problem better.