Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Remaining Work ====== * Testing the milled PCB board to see if it works just like the prototype design on the breadboard ==== Future Work ==== * Look into using a smaller microcontroller instead of the Arduino Uno * Test the milled PCB board * Configure XBee on PCB board as router and have a configured XBee coordinator connected to computer * Test communication with other weatherboxes * Create a test scenario with multiple XBees sending data * XBee Mesh Network * Deploy ==== Reminder ==== * Document everything [[weatherbox:Ant:start|Back to Ant (Xbee Box) Homepage]]\\ weatherbox/ant/ant_fall_2016_final_notes.txt Last modified: 2021/09/19 21:59(external edit)