Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Team Ant (Xbee Box) Meeting Minutes for September 8, 2016 ====== ===== Updates ===== * Looked over Apple’s and Cranberry’s schematic to get an understanding of how power, sensor and xbee are connected * Looked over the specifications on Xbee S2B manual ===== Issues ====== * Understanding how Xbees transmit/receive, communicate, operate, etc. * Not sure if Xbee can transmit/receive data packets simultaneously * Arduino doesn’t allow it * Understanding the power and sensor schematic connected to Xbee * Need to figure out how to use one Xbee for simultaneous communication * Sensors required for this design? (This box will act as a data transmit/received extension so not sure if sensors are needed) ===== Reminders ===== * Proposal presentation on september 10th, 2016 * Document everything [[weatherbox:Ant:start|Back to Ant (Xbee Box) Homepage]]\\ weatherbox/ant/meeting_minutes_september_8_2016.txt Last modified: 2021/09/19 21:59(external edit)