Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. * Double check inventory * Continue troubleshooting apple boards * Consult with Kenny to verify our apple v.4.3.2 board looks good and ready to order * 2 of 3 apple v.4.3.0 boards connected to the test gateway * Tested to see if test gateway was responding live * Found SP212 to use. It's voltage output range is 0 - 2.5 V * Need to calibrate solar irradiance sensor readings displayed on test gateway * Started crimping SP212 wires weatherbox/apple/meeting_minutes_week_of_april_7_2024.txt Last modified: 2024/04/16 02:39by elei68