Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. * Reviewed KiCad schematic of apple v.4.3.2 boards * Kenny figured out possible issue for why apple v.4.3.1 boards aren't working * Firmware believed we used a 5V arduino. However, apple uses a 3.3V arduino, so code needs to be changed to be compatible with 3.3V * Received 5V boost converters * Worked on CDR Presentation weatherbox/apple/meeting_minutes_week_of_march_31_2024.txt Last modified: 2024/04/09 03:00by elei68